This article will guide you through installing and authorizing BFD3 expansion packs.


Note: Ensure BFD 3.5 update has been performed/installed BFD 3 | How to Install & Authorize BFD 3 Software


TABLE OF CONTENTS


Download, Install & Activate the Expansion Pack(s) within inMusic Software Centre


  • If you're yet to download/install the Software Centre, please see here: https://www.bfddrums.com/downloads.html
  • After the download completes, It will open up the inMusic Software Center
  • Click on Let's Go! and your browser window will open to sign into your newly created inMusic Profile. Enter both your email address and password and click on "SIGN IN"
  • Navigate to inMusic Software Centre on your computer and click the 'My Expansions tab' to view all expansions in your account:

           

  • Click 'Download' on the right side of your screen:   
  • Once downloaded, Click 'Install':
  • Proceed with Installation steps:
  • Hit next and make sure you're aligned with the License Agreement.
  • On the next screen, you are prompted to specify the install location of your BFD3 Expansion.  
    • We suggest the default location but if you must install it on an external drive, please use an SSD via SATA or externally via USB C / Thunderbolt for acceptable speeds. 
  • Installation complete!



Loading/Scanning expansion content in BFD3


Note: Ensure BFD 3.5 update has been performed/installed BFD 3 | How to Install & Authorize BFD 3 Software


  • Upon launching BFD 3.5 (standalone or plugin), your expansion pack will automatically load into the software upon launch.
  • Locate your expansion from the available kits on the left:
  • Double-click on your Preset, Kit, Drum or Groove to load

 

Different Locations or External Drives


If your content is not stored in the default location, you can manually load this from a different drive - Note, we recommend using an SSD for the best performance; If you must connect a drive externally, USB C or Thunderbolt are suitable. 


To load your content from a different location/drive...

  • Click the 3 lines on the top left of the window > Tools > Set up content locations...
  • Click 'ADD'
  • Select your location and hit 'OK'
  • Allow a few minutes for BFD 3.5 to rescan the content path
  • Expansion successfully added! Click 'DONE'


FAQ / Troubleshooting


How much storage is required on my computer for download & installation?

Storage requirements can be found on the minimum system specifications on the product page for your specific expansion - File sizes vary depending on your choice of expansion. 


inMusic software center will specify the size of the download by clicking the 'i' icon - See below:





You'll require double this size for both download/installation. Once installation is complete, it is suitable to remove the installer from your drive, but removing the installed content will result in repeating the download/installation process. 


I have limited storage on my machine, can I download an expansion to an external drive?

You certainly can! - To download your expansion to an external drive... 

  • Connect your external drive to your machine
  • Navigate to the inMusic Software
  • Click on your initials and then click 'Settings'
  • Click 'Change' to specify a new download path



My expansions won't start downloading, what should I do?

  • Make sure you're connected to a working and stable internet connection
  • Permit inMusic Software Centre within your firewall/security settings
    • Subjective to your choice of software anti-virus/firewall settings


Permit System Storage Access:


macOS:

  • Click on the Apple icon on the top left corner of your screen.
  • Select System Preferences.
  • Go to Security & Privacy Preferences > Privacy and click Full Disk Access from the left panel.
  • Tick the checkbox for inMusic Centre. If the lock at the bottom is left locked, click it to unlock the Privacy pane. 
  • If you can’t locate inMusic Centre here, click the ‘+’ icon and select inMusic Centre from the list of available applications.


Windows:

  • In Windows 10, go to Start  > Settings  > Privacy > File system > Allow Apps to Access your File System- On
  • In Windows 11, go to Start  > Settings  > Privacy & security > File system > File System Access - On and Let apps access your file system - On



My expansion pack is missing from inMusic Software Centre, what should I do?

First, check and ensure you've selected the 'My Expansions' tab - All your expansions will be listed here:


 


Note, if you purchased these expansions some time ago via FXpansion, you'll need to migrate to inMusic profile, see this guide to help you migrate: BFD Migration | Frequently Asked Questions


Ensuring the license remains in your inMusic profile will allow for seamless installation and activation via inMusic Software Centre. You can double-check if the license is in your inMusic Profile by logging into your inMusic Profile Account and viewing your registered products HERE 


If you purchased your BFD3 Expansion from a different email address to your inMusic Profile, please contact our support team by submitting a new ticket - Our friendly team will happily assist with migrating your license between accounts.


Why do I have Yellow Triangles on my presets or Kits?

If you're seeing yellow triangles, ensure your content has properly loaded and that the BFD3 Core Library has been installed from inMusic Software Centre - Your expansion preset may contain voices from the core library to complete a kit. 


I used the BFD License Manager before, why do I need to use inMusic Software Centre now?

This update provides GUI changes as well as improvements to authorization and the management of user content; we strongly recommend our users update for the best experience with BFD3.