How to fix distortion with the Alto Professional Stealth Wireless MKII

Some users have reported distortion when first setting up the Stealth Wireless MKII.


The fix for this is quite simple.


When setting up the Stealth Wireless MKII, make sure to set the receivers to their own separate channels on the transmitter. 


For our example below, we are setting the left output of the transmitter to channel 4 and the right output to channel 9.




Once you have your transmitter set to the desired channels, you can set the receivers to the corresponding channels. *Multiple receivers can be set to the same channel if you need a setup that requires more than 2 speakers.

 

That's all you need to get started with the Alto Stealth Wireless MKII!


Please reach out to Technical Support if you have any additional questions.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article