Alto Professional Busker | How To Perform A Factory Reset

  1. Press and hold the Speaker Use button for 10 seconds. All 4 LEDs will flash on/off 4 times to indicate reset. 
  2. Once the LEDs start to flash, release the Speaker Use button.




After the reset is completed, the Speaker Use will be set to Monitor mode. • Speaker Use User mode will be reset to Flat. • All source volumes will be set to 60%. • All source EQs will be set to Flat. • The Main EQ will be set to Flat. • The Alesis FX on Channels 1 & 2 will be reset to 0%. • The Main Volume will be set to 60%.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article