Moog Support › Moog | General Technical Support & FAQ

Moog Model 112 & 210 | Frequently Asked Questions


TABLE OF CONTENTS


What are the differences between the Model 112 & 210?

FeatureModel 112Model 210
Size19.68" x 11.5" x 21.06"
500 x 292 x 535 mm
22.2" x 23.82" x 13.07"
564 x 605 x 332 mm
Weight47.84 lbs / 21.7 kg69.89 lbs / 31.7 kg
Power Output880 W Peak (400 W LF + 40 HF bi-amplified)1100 W Peak (510 W LF + 40 HF bi-amplified)
SpeakersLF Driver: 12.0"; HF Drivers: 1.0" compression driverLF Driver: 10.0"; HF Drivers: 1.0" compression driver
Frequency Response49 Hz - 20 kHz (-3 dB)
40 Hz - 23 kHz (-10 db)
38 Hz - 20 kHz (-3 dB)
35 Hz - 23 kHz (-10 db)



What are the similarities between the Model 112 & 210?

Feature
Model 112
Model 210
Inputs
Mic (XLR) x 1
Line Level (Stereo 1/4" / 6.35 mm) x 4
Mic (XLR) x 1
Line Level (Stereo 1/4" / 6.35 mm) x 4
Outputs
Balanced OUT (XLR) x 2
Line OUT (
1/4" / 6.35 mm) x2
Headphone (
1/4" / 6.35 mm)
Sub OUT (
1/4" / 6.35 mm)
Balanced OUT (XLR) x 2
Line OUT (
1/4" / 6.35 mm) x2
Headphone (
1/4" / 6.35 mm)
Sub OUT (
1/4" / 6.35 mm)
Stereo Link I/O
Yes
Yes
Bluetooth Input
Yes
Yes
EQ
Three band (low, mid & high)
Three band (low, mid & high)



What audio signal level is optimal for the Model 112 & 210?

The 1/4" / 6.35mm channel inputs are designed for line-level instruments, such as keyboards. 


If you are using an instrument that is not line-level, the signal level will be low. Connect the instrument through a suitable preamplifier, active DI box, or other device to provide proper impedance matching and signal level. 



Will the EQ knobs affect all outputs?

No. The low, mid, and high knobs only affect the low-end, mid-range, and high-end frequencies of the speaker output. 


The EQ knobs will not affect audio sent to the Balanced Out, Line Out, Stereo Line, or AUX Out.



Does the microphone preamp accept phantom-powered microphones?

No. The preamp does not supply phantom power. 



Why is there only one LED next to "Mute" & "Power" on the 112?

On the Model 210, the Mute and Power switches each have their own LED to indicate whether the speaker is powered on or muted.

 

On the Model 112, these indicators are combined into a single LED. The LED will illuminate red when the speaker is powered on. The LED will light up amber when powered on and the Mute switch is activated.



When stereo linking, is the primary speaker right or left?

The primary speaker is the right channel. Connect the output of the primary, right-channel speaker to the input of the secondary, left-channel speaker for stereo operation



Do the Model 112 & 210 support Bluetooth inputs?

Yes. You can connect a phone directly to the speaker and play music through the speaker from up to 30.5 m (100 ft) away.



Why can't I hear audio from my connected Bluetooth device?

Make sure your device volume is turned up, and then turn up the volume knob on the speaker until you hear the signal. 



Do the casters come installed in the Model 210?

No. The casters are supplied in a separate box and are not pre-installed. These click into the bottom of the amp.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article