TABLE OF CONTENTS
General Setup Instructions
If your Kontrol MK3 is not behaving as it should, please first make sure that you have followed all the necessary steps to set up your keyboard.
You can find all the steps here: How to set up your Kontrol S-Series MK3
Troubleshooting
Connection issues
If you have connection issues, please read the following article:
Kontrol S-Series MK3: Avoiding Connection Issues by Using the Right USB-C Hubs and Cables
Issues with the Firmware Update
If something went wrong with the Firmware Update of your Kontrol MK3, please read this article:
Kontrol S-Series MK3: Troubleshooting Firmware Update Issues
Keyboard Display Message "You're low on power. Please connect a USB-C power supply"
If you receive the above message, please read the following article with troubleshooting steps:
Kontrol S-Series MK3: "You're low on power. Please connect a USB-C power supply"
Registered keyboard still asks for serial numbers
If your registered keyboard's display still shows the welcome screen and a prompt to add the serial number, please install the Hardware Connection Service in Native Access as explained in this article.
Sustain / Expression Pedal issues
To set up your pedal, please follow the steps in this article:
How to Configure Sustain / Expression Pedals on Kontrol Keyboards
Blank displays (Logic Pro)
If your keyboard shows blank screens while using it with Logic Pro, please configure the MIDI ports as shown in the following article:
My Kontrol S-Series MK3 Display Shows a Blank Screen on Logic Pro
How Does it Work?
You can find the manuals for the hardware and software here:
Videos
How to use everything in Kontrol S-Series MK3:
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article