Rane Twelve MKII | USB Connection Intermittent or Not Functioning

If your Twelve MKII is not connecting in Serato, make sure that the Twelve MKII is in Serato USB mode:


  1. Press and hold the DVS Mode button
  2. Once it begins to flash, press the DVS Mode button to cycle through the modes. 
  3. Select the “Serato USB” mode and wait 3 seconds. The button will stop flashing and the OLED display will turn off to confirm the selection.


If the Twelve still does not connect with Serato, use the USB MIDI tests below to determine if the Twelve is connecting and communicating properly with your computer:


Using a MIDI Monitor to Test a MIDI Device


Troubleshooting USB MIDI devices on Mac


If the MIDI monitor's input window shows data when you move the platter or a fader, then the Twelve is communicating with the computer.  This will indicate a need to review the setup:  Rane Twelve MKII | Setup and Connectivity


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article