There are multiple ways you can save your MPC Project.


The standard way to save a project is by going to Menu > Save > Project or Menu > Save > Project As.
 
Auto Save: The MPC also has an Auto Save feature that can be accessed via Menu > Preferences > Project Load/Save.


When this is enabled, your MPC will automatically save your project within a set time frame (1 min, 2 mins, 5 min and 10 mins):


Temporary File Location: Ensure that you select a drive for the temporary file location, as this is where the MPC will save the auto saved ProjectData files.

On default, the MPC will save your auto save projects to the Internal drive via Internal > MPC Documents > Projects.

We recommend using an alternative drive such as an SSD, HDD, USB or SD Card. 



Once this has been set up, the MPC will display a save progress bar at your chosen timeout range whilst you work on your project.


Please note: In this operation, the save progress bar will appear whilst you are working and you will not be able to operate the MPC until saving has been complete:



Disable Auto Save: To stop the save progress bar from appearing whilst you work, you must disable Auto Save by going to Menu > Preferences > Project Load/Save


Your settings should look exactly like this:



Locating the Auto Saved Project: To locate the auto saved project, go to Menu > Brower and tap the gear icon (top-right side of the screen)


Make sure that Hide project data folders is unchecked