Native Instruments Support › Maschine

Which Audio & MIDI Devices Are Compatible with MASCHINE+ via USB?

With the MASCHINE+ USB ports on the back of the device, it is possible to connect a wide variety of class-compliant MIDI and audio devices. This includes the entire range of KOMPLETE AUDIO interfaces, the KOMPLETE KONTROL M32, and other third-party devices.

In theory, so long as the device is class-compliant, it should be detected by MASCHINE+ and function immediately.

Below are lists of Native Instruments and third-party devices that have been tested and are known to function with MASCHINE+ via USB. These lists may be updated as we test more devices and are able to confirm their compatibility.

Note: The devices marked with an asterisk (*) indicate that they have been tested by other users who have confirmed their compatibility with MASCHINE+.

NI Audio Interfaces

KOMPLETE AUDIO 6 MK1
TRAKTOR AUDIO 2 MK2
TRAKTOR AUDIO 6
TRAKTOR AUDIO 10
KOMPLETE AUDIO 1
KOMPLETE AUDIO 2
KOMPLETE AUDIO 6 MK2

NI MIDI Devices

Note: The devices marked by (†) symbol will only work in MIDI mode when connected to MASCHINE+.

KOMPLETE KONTROL M32
KOMPLETE KONTROL S-Series MK1†
KOMPLETE KONTROL S-Series MK2
KOMPLETE KONTROL A-Series
MASCHINE JAM

Third-Party Audio Interfaces

Note: The performance and availability of some features may vary depending on the interface.

Manufacturer	Device
Behringer	U-Phoria UMC404 HD
Behringer	UMC1820
Elektron	Analog Heat MK1/MK2*
Elektron	model:samples*
Elektron	model:cycles*
Endorphin.es	Shuttle Control
Line 6	SonicPort VX*
Focusrite	Scarlett 2i2 (Gen 1)
Zoom	H2n
Zoom	H4n Pro

Third-Party MIDI Devices

Note: The performance and availability of some features may vary depending on the MIDI device.

Manufacturer	Device
Akai	LPD8*
Arturia	MicroFreak
Elektron	Digitone*
Elektron	Digitakt
Elektron	model:samples*
Elektron	model:cycles*
Faderfox	EC4
Korg	Nano Pad*
Teenage Engineering	OP-Z

External USB Drives

External USB drives can be used with your MASCHINE+ and can be browsed through via your device.

Note: The MASCHINE+ supports standard USB2 hard drives powered by 2.5W (5V @ 500mA). If you experience issues, check your drive’s specs, as it may require more power.